ELHART — Engineering & Manufacturing of Automation Solutions

Founded in 2017, ELHART unites time-tested engineering traditions with modern technology. We design and manufacture over 500 reliable automation devices used across the food, agriculture, power generation, HVAC, and mining industries worldwide.

We are a trusted partner for OEMs, system integrators, and manufacturing plants. With a global dealer network, full-cycle engineering, and 100% quality control, we deliver fully certified products, turnkey solutions, and flexible partnership terms to optimize your industrial processes.

COMPONENTS FOR INDUSTRIAL AUTOMATION

ATE.S
ATE.S current transducers
  • Analog output 4...20 mA
  • Overload protection
  • Accuracy class from 0.2% to 0.3%
  • Settings via DIP switches
  • Response time from 0.1 s
  • ---------------------------------------------------------------------------------
More detailed
HTE.PF
Chemical-resistant humidity transmitter for harsh environments HTE.PF
  • Relative humidity measurement range: from 0 to 100%
  • Temperature measurement range:
    • analog output: -20 to +80 °C
    • RS-485 interface: -40 to +80 °C
  • Outputs: 0...10 V, 4...20 mA, RS-485 (specified in ordering code)
  • Supply voltage: determined by the output signal type
More detailed
ECD2
Dual-channel digital PID controller with universal inputs ECD2
  • 2 universal inputs: RTD,TC, current, voltage, variable resistors, discrete signals
  • 2 isolated control channels: PID, PID-Fuzzy, ON/OFF, Alarm, retransmission mode, manual control
  • Outputs: EM relay, pulse output for SSR, DAC 0/4…20 mA
  • Power supply 24 VDC
  • RS-485 interface (Modbus-RTU)
More detailed
PTE5000C
Pressure transmitter with analog output PTE5000C
  • Measuring range: from 0 to 4, 6, 10, 16 bar
  • Accuracy: ±0.5%
  • Output: 4...20 mA
  • Connecting threads: M20×1.5, G 1/2", G 1/4"
  • Housing material: AISI 304
  • Sensing element: ceramic Al2O3
  • O-ring face seal: Viton (FKM)
More detailed
ELV1
Multifunctional liquid level controller ELV1
  • 4 algorithms of operation
  • Individual sensitivity adjustment of each input, two ranges:
    • low resistance (max 5 kΩ)
    • high resistance (max 1 MΩ)
  • False trigger protection for each input
  • Working with conductive probes and sensors with NPN output
  • AC power supply for conductive probes
More detailed
CLS.D01
Conductive Level Switch CLS.D01
  • Operating temperature: max +100 °C
  • Operating pressure: max 6 bar
  • Adjustable sensitivity thresholds: 10, 100, 250, 500 kΩ
  • Output type: PNP/NPN (max 200 mA)
  • Connecting thread: M27×1,5 and G 3/4"
  • Ingress Protection: IP65
  • ---------------------------------------------------------------------------------
More detailed
News
CERTIFIED VERIFICATION LABORATORY
VERIFICATION LABORATORY
VERIFICATION
CERTIFIED VERIFICATION LABORATORY

Holding official state accreditation (RA.RU.313516), our laboratory provides high-precision testing based on international standards. Using our proprietary test stands, we perform primary, periodic, and extraordinary verification for industrial equipment and sensors across all brands.

WARRANTY AND TECHNICAL SUPPORT FOR EVERY ELHART DEVICE

Depending on the product type, our equipment is covered by a 12 to 36 month warranty.

Furthermore, our engineering team continues to accept service requests and provide expert assistance long after the warranty has expired.

ELHART WARRANTY
COMPANY HISTORY

OOO "ELHART" is a Russian developer and manufacturer of industrial automation equipment. Founded in 2017 in Krasnodar, our company is dedicated to preserving and advancing the strong instrumentation and control engineering traditions rooted in the Soviet era.

ELHART STORY
ELHART STORY

FAQ

  • How do I purchase ELHART equipment?

    You can buy our products through our official distribution network. Check the Distributors section to easily locate a supplier in your region.

  • How can I become an ELHART dealer?

    We welcome partnerships with companies interested in promoting our automation devices. Dealership terms are discussed individually after a meeting and signing an agreement. To get started, please submit a request via our feedback form or contact us directly.